A church treasurer calls on the third of the month. The construction loan statement is higher than last week, and nobody missed a payment. Your board packet is due Friday. The investor statement has to match the general ledger, and the workbook that has carried this portfolio is one formula away from a quiet miss.
That higher balance is an interest accruing loan doing what the note already says. Interest grows with time on unpaid principal. Cash has not moved. The balance still moves. The same mechanic sits under church construction loans, renovation notes, and the certificates that fund them. When the daily amount, the payment split, a rate reset, or a delinquency date is wrong, income and the board report drift together.
Treat this as a control problem, not a calculator trick. The pages below set the inputs, the daily math, the payment order, rate resets, the point where accrual must stop, and the yield a coupon does not capture. You can apply every control on the system you already run.
What Interest Accrual Means for Your Loan Balance
A congregation closes on a $200,000 loan at 6%. Two weeks later the statement balance is higher. No installment was due yet. The pastor asks why the church owes more than it borrowed. You will hear a version of that question from the investor who funded the note.
Accrued interest is interest earned because time passed. It is not a charge that appears only on a due date. On an interest accruing loan, you recognize interest each day on outstanding principal, the unpaid amount still owed, whether or not cash has moved. Interest received is the cash that later settles what has already been earned. Those two amounts match only on the day the payment covers the accrual.

Four inputs and a moving meter
Every accrual needs four inputs.
- Principal outstanding: the unpaid balance the rate applies to that day.
- Annual rate: the contractual rate, not a benchmark you happen to watch.
- Day-count convention: how the note counts a year, such as actual/365 or a monthly fraction.
- Accrual frequency: each day, or a set monthly amount.
Change any one of them and the subledger will not tie to the general ledger.
Think of a taxi meter. The fare grows while the ride continues. A payment settles only what has already accumulated. It does not rewind the meter. Principal falls only when a payment is larger than the interest accrued since the last payment. A smaller payment leaves principal unchanged, or increases it if the note capitalizes the shortfall.
An interest accruing loan recognizes interest as time passes, so the balance moves every day, including between payment dates.
Put that sentence in the loan policy and in the borrower FAQ. It answers the statement question without a lecture, and it tells your staff which balance is allowed to move between due dates.
How to Calculate Accrued Interest Day by Day
A $1,000 balance at a simple annual rate of 6% earns $60.00 over a full year, and about $4.93 over 30 days on an actual/365 basis, before payments, fees, or compounding. The formula behind both figures is principal times the annual rate times the days in the period, divided by the day-count basis. As principal is repaid, each later day accrues on a smaller amount, unless the note capitalizes the unpaid interest.
The same arithmetic doubles as the audit test for a servicing file. A full year rarely causes trouble. Thirty days is where the conventions begin to disagree.
| Principal | Rate | Day-count | Accrued in 30 days |
|---|---|---|---|
| $1,000 | 6% | actual/365 | $4.93 |
| $1,000 | 6% | 30/360 | $5.00 |
| $200,000 | 6% | actual/365 | $986.30 |
| $200,000 | 6% | monthly 1/12 | $1,000.00 |
The last row is one-twelfth of annual interest rather than a 30-day slice. Treating the two as interchangeable is why a monthly shortcut and a true daily convention refuse to tie at close. Hand why APR divided by 12 misleads to whoever maintains the workbook, and loan interest calculation methods lays out the same choice for servicing teams.
A posting routine you can audit
- Confirm principal outstanding as of the prior cutoff, after the last applied payment and any advance.
- Confirm the rate in effect on each day, including reset dates that fall inside the period.
- Multiply that day's balance by the rate and by one day divided by the note's basis.
- Sum the days, and round only at posting, the way the loan documents describe.
- Post the total to the accrued-interest subledger and reconcile it to interest income in the general ledger.
Three errors cause most of the drift a cleanup finds. Staff apply a 360-day basis when the note says 365. The count starts on the posting date instead of the effective date, which shortens or lengthens the accrual period. The accrual is rounded every day, so a penny of drift per loan becomes real dollars across a portfolio by quarter-end. A mid-period rate reset adds a fourth: the period has to be split at the reset date, and each half runs at its own rate.
Recompute one loan by hand each month and compare it with the system to the cent. Pick a different note each time, including one that reset or funded a draw during the period. A match on a quiet fixed-rate loan does not prove the batch.
How Each Payment Splits Between Interest and Principal
A level monthly payment hides a moving split. Take the same $200,000 loan at 6% over 30 years, where the payment is $1,199.10. On a monthly one-twelfth basis, month one accrues $1,000.00 of interest, so only $199.10 reaches principal. Each later month accrues on a smaller balance, so the interest piece shrinks and the principal piece grows by design, even though the cash moving out the door never changes. Build the schedule with the same amortization method your statements use, or the board packet and the borrower notice will disagree.
| Payment | Interest accrued | Principal applied | Balance after payment |
|---|---|---|---|
| 1 | $1,000.00 | $199.10 | $199,800.90 |
| 2 | $999.00 | $200.10 | $199,600.80 |
| 3 | $998.00 | $201.10 | $199,399.70 |
Interest in months two and three is rounded to the cent at posting. The cash payment does not change. The split does.

The split order matters as much as the arithmetic. The CFPB's auto-loan guidance describes a common sequence: payments generally apply first to fees, then to accrued interest, and finally to principal. Follow that order unless your note says otherwise, and write it down.
- Apply the payment to late charges or other fees that are due.
- Apply it to interest accrued through the payment's effective date.
- Apply the remainder to principal due under the schedule.
- Hold any excess as unapplied cash or as a prepayment, under written policy.
The day-count convention changes where the line falls. On the monthly basis, $200,000 at 6% accrues $1,000.00 in month one, while the same balance over 30 days on actual/365 accrues $986.30. Both figures come from the same loan. Use the note's day-count for the subledger and for this split, and when a payment lands below accrued interest, the shortfall stays accrued or capitalizes into principal if the note says so.
One church, several notes
A borrower who holds three notes and sends one short check forces an allocation decision, and the choice has consequences. A partial payment spread proportionally across every open loan can leave each loan short, each one delinquent, and each one drawing its own late fee. Contractual delinquency first, highest rate first, and borrower direction all consume the same cash and leave different balances. A rule that trims total interest can still worsen delinquency reporting, so the hierarchy, the exception path, and the borrower disclosure belong in writing before the first odd payment arrives.
Practical rule: On an ACH debit, interest runs through the effective settlement date, not the date someone keyed the file.
Timing rules sit inside the same control problem. Nacha's ACH guide requires the originator to keep the authorization and produce a copy within 10 business days of a request. A changed debit date calls for seven calendar days' notice, and a changed consumer debit amount calls for 10 calendar days' notice. A delayed debit adds interest on a daily-simple loan, so notice dates and accrual dates belong in the same workflow, tracked by the same person who owns the payment file.
Fixed Rates, Variable Rates and Benchmark Movements
The federal funds rate is the overnight cost of unsecured dollar borrowing between depository institutions. The Federal Reserve's FRED series begins on July 7, 1954, when the effective rate was 1.00%. That rate is not the rate on every church loan. It influences longer-term mortgage, loan, and savings rates, and your contract still adds a spread, a floor, or both. A primer such as BadCreditMD on fixed versus variable rates is a useful board handout when someone asks why two notes signed the same week do not move together.
A fixed-rate loan keeps its contractual rate. Daily accrual stays constant for a given balance. A variable-rate loan resets on stated dates, so the daily amount must switch on the effective date, not when someone updates a cell.
| Feature | Fixed-rate loan | Variable-rate loan |
|---|---|---|
| Rate that drives accrual | Contract rate, unchanged for the term | Reference rate plus contract spread, reset on set dates |
| Daily accrual amount | Constant for a given balance | Changes on each reset date |
| Effect of a benchmark move | None on the existing rate | Flows into accrual at the next reset |
| Backdated correction risk | Low | Higher when resets are entered late |
| Payment effect | Usually a fixed payment | Payment or term may change at reset |
Name an owner before the index moves
Three controls belong to a person, not to a folder.
- One rate table. A single owner maintains effective dates, index, spread, and floor for every variable note.
- Maker-checker on every change. A second person approves the rate before it posts to accrual.
- A parallel check when the benchmark moves. Recompute the first day after reset on at least one loan and match the batch to the cent.
Construction-draw loans need the same table. The balance grows on each advance while the rate may reset, so accrual has to be rebuilt from the advance date and the rate then in force. A late advance entered at today's rate will misstate every day back to the funding date. Correct it with a dated reversing entry, not by overwriting history.
Nonaccrual and the 90-Day Rule
Accrual is not an uninterrupted formula. A delinquent church loan can sit in a spreadsheet and keep earning income that you are not allowed to recognize. That overstatement reaches the board dashboard, the general ledger, and sometimes the investor statement, because all three read the same unchecked balance.
The Federal Reserve Bank of New York's interest-accrual guidance, read with OCC policy, is the working rule. You generally stop accruing when principal or interest has been due and unpaid for 90 days or more, unless the loan is both well secured and in the process of collection.

What stops, and what it takes to start again
Once the loan is in nonaccrual, contractual interest stops. So does amortization of deferred net loan fees or costs, because those amounts are part of interest accrual under common U.S. guidance. Accrued but uncollected interest stays in its own balance. It does not sit in recognized income.
Restoration needs a file, not a hope. Delinquent principal and interest are brought current, or you document that the loan again meets the well-secured and in-process exception. Either path should name the person who approved it and the date the status changed.
- Measure delinquency from contractual due dates, not from the date a payment was posted.
- Generate an automatic exception at the 90-day threshold so a quiet loan cannot age in a side list.
- Keep accrued but uncollected interest separate from income on the subledger and on board reports.
- Require maker-checker approval before anyone backdates a status change.
- Keep an audit trail that links status, calculations, reversals, and approvals, and do not allow silent edits.
Delinquency counted from the posting date will miss the 90-day line, or it will trip the line on a loan that was contractually current.
Say a $200,000 church loan goes unpaid and the workbook keeps the 6% formula running. Each extra month books interest you should have stopped, and fee amortization may keep running with it. Reverse the income, freeze the status, and make the dashboard read the nonaccrual flag before the audit committee packet goes out.
Fees, Effective Yield and What the Coupon Misses
A 6% coupon is the cash rate in the note. It is not always the yield you report. Under the IFRS 9 discussion of the effective interest method, the effective interest rate is the rate that discounts estimated future contractual cash flows, including principal, interest, and qualifying transaction costs, back to the loan's initial gross carrying amount. A 6% loan with a significant origination fee can carry an effective rate above 6%, because fee amortization is extra economic return.
Each period, interest income equals the opening amortized-cost balance times that effective rate. The gap between that amount and the cash coupon adjusts the carrying balance for fees, premiums, discounts, or costs. The economic yield stays constant even when the cash payment does not match the coupon. How you treat loan servicing fees in that schedule is a policy choice you should write down, not a spreadsheet habit.
What has to survive a system change
Recomputing from today's balance, without the original inputs, breaks the tie-out and distorts yield in investor and regulatory reports. The servicing record should keep:
- The original cash-flow schedule, including irregular payments.
- Fee components and the dates they are earned or deferred.
- The day-count and the rate basis used at origination.
- The payment application order.
- The rounding policy, including when cents are taken.
Expected contractual terms belong in the rate as well. Prepayment options, extension options, and a changing amortization on a construction loan can move the effective rate even when the coupon is untouched. Expected credit losses stay out of the rate. You estimate those separately.
U.S. GAAP also defers net loan fees and costs into income over the life of the loan, though the mechanics are not identical to IFRS 9. For a fund, the operating split is simple enough to govern. Contractual accrual follows the note rate and the day-count. Effective-interest revenue includes the fee amortization. Credit-loss estimates never get buried inside either number. Label all three on the board report so a lower coupon is not mistaken for a weaker portfolio, and a large fee is not mistaken for extra cash interest.
Confirm Your Accrual Rules Before the Next Close
The decision your board can make this month is narrow. Write the accrual rules down, then test them on live loans before the next close. You do not need a new system to start. You need one policy note and four weeks of proof.
Record six decisions.
- The day-count basis stated in each note.
- Whether that note accrues daily or as a monthly one-twelfth amount.
- The named owner, and the maker-checker step, for rate effective dates.
- The nonaccrual trigger at 90 days past the contractual due date, and the evidence required to restore accrual.
- The allocation order when a partial payment covers several loans.
- Whether net fees change effective yield or stay outside contractual accrual.
Four weeks, three loans, one log
In week one, recompute by hand one fixed-rate loan, one variable-rate loan, and one construction-draw loan. In week two, match system interest, principal, and ending balance to the cent, including the $200,000 loan at 6% over 30 years with the $1,199.10 payment. In week three, log each exception, its cause, and the correcting entry. In week four, take the policy and the exception log to the board or the audit committee.
CEFCore can store those rules on each loan and run daily interest accrual from origination through payoff, including month-end close procedures and automated tie-out verification. The same four-week test applies on a spreadsheet or any other system. What matters is that the policy, the subledger, and the board packet describe one loan, not three versions of it.
CEFCore's loan management covers the full lifecycle from origination through payoff, with automated payment processing, interest accrual, and amortization schedules that follow the rules you just wrote down. If your fund wants day-count, rate dates, nonaccrual status, and payment order on the same loan record, visit CEFCore and see how daily accrual and month-end tie-out sit in one close. Your board should not have to wait on a workbook to learn what yesterday's interest was.
